Soehnle 7711 manual Correcting values, Calling up the list of fixed tare value memories for taring

Page 19

Transferring fixed tare values from a PC to the digital indicator

•Here you require a special software. For more information, please contact the Soehnle Profes- sional Service personnel.

Changing or overwriting a fixed tare value memory

•Call up the Input menu

(Setting mode > Program Settings > General > Fixed tare values)

•Press ENTER and the F key simultaneously to access Setting mode.

•The arrow points to "Program Settings". Confirm by pressing ENTER.

•Confirm the message "General" by pressing ENTER.

•Press the TARE key to browse to "Fixed tare va- lues" and accept by pressing ENTER.

Correcting values

•The last selected fixed tare value memory is dis- played. Press the F or TARE key to select the tare memory to be changed or enter the memory lo- cation number and confirm by pressing ENTER.

•Press ENTER. The input field for the tare location description is displayed.

•Change the description by typing it into the KEYPAD and confirm by pressing ENTER.

•The arrow points to "Tare value".

•Press ENTER. The input field for the tare value is displayed.

•Change the tare value by typing it into the KEY- PAD and confirm by pressing ENTER.

•Go back to the tare memory selection by pressing the ZEROING key.

•If you want to change other tare memories, press the F key of the TARE key to select the next memory location to be changed and repeat the procedure as described above.

•To return to weighing mode, press the ZEROING key and then the ORG key.

Calling up the list of fixed tare value memories for taring

The tare value from the fixed tare value memory can be activated with the scale unloaded (i.e. be- fore the weighing operation) or with the scale loa- ded (during a weighing operation).

•The display pane shows a weight value ≥ 0.000 kg.

•First press ENTER and then the TARE key simul- taneously. The fixed tare value memory last used appears in the display.

•Press the F or TARE key to browse to the required fixed tare value memory or type in the memory location number and confirm by pressing ENTER.

•Press ENTER to activate the fixed tare value. The display shows the gross value minus the tare value (net).

•Further tare values from the memory are activated by repeating the procedure described above.

Clearing an existing fixed value

•Call up the input menu

(Setting mode > Program Settings > General > Fixed tare values)

•Press ENTER and the F key simultaneously to access Setting mode.

•The arrow points to "Program Settings". Press ENTER to confirm.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents BED Scale English ContentsClassification Allgemeine InformationenIntended use CE signUse of additional devices Safety instructionsMaintenance and service CleaningDisposal Warranty/liabilityEnglish Power-on / Power-off Installing the scale elementsPutting Into Operation Radio link Power-offCharging the batteries Charge run time Display of link stateRecommendation Keypad for input and control Input and ControlAlphanumeric input Input procedureTypes of input box Indicator display Icons/characters Keypad in Setting mode Setting ModeOverview of menu navigation Program settings Terminal Scales Data Processing ServiceSettings in Program Settings menu Calling up Setting modeInputs in Setting mode Settings in Setting mode Organisation data Reset terminal User password Date/timeX10 times 10 display Power-on zeroing Weighing and taringFunctions Manual zeroingEach memory location has a Weighing with manually entered tareWeighing with stored tare values Showing the value in the tare memoryCalling up the list of fixed tare value memories for taring Correcting valuesProvisional tare/dialysis function Using the dialysis functionClearing a tare value Hold function Error message when taringDisplaying the tare memory BMI functionPrint Connection options factory settingInfo about printer Following conditions can be assigned to print templates Default print templates, factory settingPrint-command conditions Programming the F keyZeroing not possible Error numbers Cause / Remedy / InfoTaring no possible Underload Place weight on scaleValue above zero range limit OverloadOther technical data Technical dataInstructions for installing the scale Explanations of labels and icons Electronic nameplate and calibration counter80mA Symbol for EU calibrationSoehnle Professional GmbH & Co. KG SCALES, System Solutions and Special Developments
Top Page Image Contents