Soehnle 7711 manual Display of link state, Charge run time, Recommendation

Page 9

Display of link state:

Press Info key + 1. The following appears in the indicator display:

Weighing device	State	Battery voltage
1: 0080025005BB7	OK	6.3 V
2: 0080025005C0D	Error
3: 0080025005C70	OK	6.3 V
4: 0080025005ADC	OK	6.3 V

Charge run time:

A battery charge is sufficient for approx. 12 hrs con- tinuous duty. When the scale is switched off for most of the time (90% OFF), the batteries may remain in the weighing devices for up to 125 hours before they require a recharge.

Caution: Even when the digital indicator is switched off, the Bluetooth link is activated at regular inter- vals. For this reason, the batteries will discharge in this state and must be recharged at the latest after 125 hours.

Recommendation:

Always remove the batteries from the weighing de- vices after you switch off the digital indicator and place them in the battery box of in the charger. This makes sure that the scale works reliably the next time it is switched on.

If the bed scale remains without use, remove the batteries from the weighing devices to prevent deep discharge. The scope of supply comprises eight batteries.

9

Image 9

Contents BED Scale English ContentsIntended use Allgemeine InformationenCE sign ClassificationMaintenance and service Safety instructionsCleaning Use of additional devicesDisposal Warranty/liability English Installing the scale elements Power-on / Power-offPutting Into Operation Power-off Radio linkCharging the batteries Display of link state Charge run timeRecommendation Keypad for input and control Input and ControlInput procedure Alphanumeric inputTypes of input box Indicator display Icons/characters Keypad in Setting mode Setting ModeOverview of menu navigation Program settings Terminal Scales Data Processing ServiceInputs in Setting mode Calling up Setting modeSettings in Setting mode Settings in Program Settings menuUser password Reset terminalDate/time Organisation dataFunctions Power-on zeroing Weighing and taringManual zeroing X10 times 10 displayWeighing with stored tare values Weighing with manually entered tareShowing the value in the tare memory Each memory location has aCalling up the list of fixed tare value memories for taring Correcting valuesUsing the dialysis function Provisional tare/dialysis functionClearing a tare value Displaying the tare memory Error message when taringBMI function Hold functionConnection options factory setting PrintInfo about printer Print-command conditions Default print templates, factory settingProgramming the F key Following conditions can be assigned to print templatesError numbers Cause / Remedy / Info Zeroing not possibleTaring no possible Value above zero range limit Place weight on scaleOverload UnderloadTechnical data Other technical dataInstructions for installing the scale Explanations of labels and icons Electronic nameplate and calibration counter80mA Symbol for EU calibrationSoehnle Professional GmbH & Co. KG SCALES, System Solutions and Special Developments