**Depending on M/B, you might have
To remove drive cassette**
A. Identify if M/B is AT, ATX or microATX. B. Place chassis on its side with electronic
Bay in view (Fig. 9)
C. Using your choice of standoffs or stakes to fasten M/B, prepare and screw into mounting plate.
D. Make sure punch out holes for I/O ports on the I/O plate are punched out matching ports on the M/B.
E. Install at an angle, first by lining up the I/O ports on the M/B with I/O plate. (Fig. 10)
F. Once holes are lined up, set M/B on standoffs or stakes and make sure the M/B is seated properly. (M/B mounting screw holes vary with manufacturer. Please refer to M/B user manual for details.)
G. Fasten M/B using hex head screws.
H. Connect wiring as directed in M/B user Manual.
Step 6. Install the power supply (P/S)
Slide into P/S area and fasten with hex head
screws (Fig. 11).
Fig:9
Fig:10
Fig:11