DK-CL3P

ENGLISH

System connections (continued)

Preparation for Use

Install/Replace backup batteries

Use 4 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included.

1Open the battery cover.

2Insert the batteries according to the direction indicated in the battery compartment.

When inserting or removing the batteries, push them towards the battery terminal.

3Close the cover.

Notes:

Backup battery system is use to provide continuous alarm operation and clock setting in event of a power failure. During battery replacement, please make sure the AC/DC adaptor is connected, otherwise all setting may be lost.

Remove the batteries if the unit will not be used for a long period of time to prevent battery leakage which may cause potential damage.

The first time the batteries is install, the clock will blinking on the display. Please set the time and date (refer page 11).

Note:

Battery life may vary depending on the temperature, battery types and usage conditions.

Precautions for battery use:

Installing the batteries incorrectly may cause the unit to malfunction.

Insert the batteries according to the direction indicated in the battery compartment.

Replace all old batteries with new ones at the same time.

Do not mix old and new batteries.

Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Caution:

Do not use rechargeable batteries (nickeI-cadmium battery, etc.).

E-9

Page 10
Image 10
Sharp DK-CL3P System connections, Install/Replace backup batteries, Close the cover, Precautions for battery use