ENGLISH
Listening to the radio (continued)
Radio
3Tune to the desired station. Manual tuning:
Press the TUNING (
or 
) button as many times as required to tune in to the desired station.
Auto tuning:
When the TUNING (
or 
) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
●After 5 seconds the tuner
frequency will change to time |
|
| |
display. To preview the tuner |
| MHz | |
FM | |||
frequency, press DISPLAY(TV |
|
| |
OUT) button. |
|
| |
FM TUNER | |||
● When radio interference occurs, | |||
indicator | |||
auto scan tuning may stop | |||
automatically at that point. |
|
| |
●Auto scan tuning will skip weak signal stations.
●To stop the auto tuning, press the TUNING (
or 
) button again.
Receiving an FM stereo transmission:
●If the FM reception is weak, the reception will auto changes to monaural, and the sound becomes clearer.
■Programming a station
You can store 20 FM stations in memory and recall them at the push of a button. (Preset tuning)
1Perform steps 1 - 3 in “Tuning” on pages 14 - 15.
2While the Tuner frequency is display, press the MEMORY button for more than 2 seconds on the main unit to enter the preset tuning saving mode.
MHz | MHz |
FM | FM |
3 Within 5 seconds, press the MEMORY button repeatedly to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4Within 5 seconds, press and hold the MEMORY button on main unit to store that station in memory.
If the preset number indicators disappear before the station is programmed, repeat the operation from step 2.
5Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously programmed for that preset channel number will be erased.
Note:
The backup batteries function protects the programmed stations should there be a power failure or the AC/DC adaptor becomes disconnected. If the backup batteries are drain off, the programmed stations will be erased.
■To recall a programmed station
Press MEMORY button repeatedly to select the desired programmed station.
