DK-CL3P

ENGLISH

Advanced Features

E-17

Alarm operation (continued)

Note:

If wake up source is set to iPod, and iPod is not present, the alarm source will change to default Buzzer.

Activate and deactivate the alarm

1

During standby mode, press ALARM button to

 

deactivate current alarm times and wake up source.

2

Press ALARM button again to reactivate the last alarm

 

function. When the alarm setting time is activated,

 

alarm information will shown for 5 seconds and alarm

 

icon ( ) will appear on display.

 

SUN MON TUE WED THU FRI SAT

 

S

 

BB

3

When alarm has started, alarm icon ( ) will blinking on

 

the display.

Daily Alarm:

During alarm is function, press ALARM RESET button to stop alarm and it will come again on the next day.

Sure Alarm:

When power failure, the alarm will function if the backup batteries are installed.

Snooze function

Once alarm has started, pressing the SNOOZE/DIMMER button will stop alarm for 9 minutes.

During snooze, icon will light up and icon will blinking. Once the snooze time has expired, alarm will continue.

The snooze function can be operated during 1 hour alarm cycle.

Enhancing your system

The auxiliary cable is not included. Purchase a separate auxiliary cable as shown below.

Portable audio player

Computer

To the line output jack

Auxiliary cable (not supplied)

Page 18
Image 18
Sharp DK-CL3P operation manual Enhancing your system, Alarm operation, Activate and deactivate the alarm, Snooze function