■Listening to the audio/video sounds from portable audio player, computer etc.
1Use the auxiliary cable to connect the portable audio player, computer etc. to the AUDIO IN jack.
When using video equipment, connect the audio output to this unit and the video output to a television.
2Press the
3Press the FUNCTION button to select AUX function.
4Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the television and do not make any auxilary playback while listening to the iPod or iPhone.
Troubleshooting chart
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center.
■ General
Symptom | Possible cause |
|
|
● The clock is not set to the | ● Did a power failure occur? |
correct time. | Reset the clock. (Refer to |
| page 11) |
● When a button is | ● Set the unit to the power |
pressed, the unit does | |
not respond. | it back on. |
| ● If the unit still malfunctions, |
| reset it. |
| (Refer to page 19) |
● No sound is heard. | ● Is the volume level set to “0”? |
|
|
■Tuner
Symptom | Possible cause |
●The radio makes unusual ● Is the unit placed near the
noises continuously. | TV or computer? |
| ● Is the FM antenna placed |
| properly? Move the antenna |
| away from the AC/DC |
| adaptor if it is located |
| nearby. |
ENGLISH
Advanced Features/Reference
