Abit AW8 Front Panel Switches & Indicators Headers, Hled Pin 1, RST Pin 5, Spkr Pin 13, 15, 17

Page 20

2-12

Chapter 2

 

 

(6). Front Panel Switches & Indicators Headers

This header is used for connecting switches and LED indicators on the chassis front panel.

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.

HLED (Pin 1, 3):

Connects to the HDD LED cable of chassis front panel.

RST (Pin 5, 7):

Connects to the Reset Switch cable of chassis front panel.

SPKR (Pin 13, 15, 17, 19):

Connects to the System Speaker cable of chassis.

SLED (Pin 2, 4):

Connects to the Suspend LED cable (if there is one) of chassis front panel.

PWR (Pin 6, 8):

Connects to the Power Switch cable of chassis front panel.

PLED (Pin 16, 18, 20):

Connects to the Power LED cable of chassis front panel.

AW8 Series

Image 20
Contents AW8 Series Copyright and Warranty Notice Table of Contents Exit Without Saving Appendix a Features & Specifications IntroductionBack Panel I/O Layout Diagram Chapter Hardware Setup Install The MotherboardInstall CPU, Heatsink and Fan Assembly User’s Manual Install System Memory Method Channel a Channel BDIMM1 Connectors, Headers and Switches ATX Power Input ConnectorsFAN Power Connectors Pin 1-2 shorted default Normal operation Cmos Memory Clearing HeaderWake-up Header USB-PWR110Chapter Back Panel Audio Connection SlotPdif Connection Front Panel Switches & Indicators Headers Hled Pin 1RST Pin 5 Spkr Pin 13, 15, 17Additional IEEE1394 Port Headers Additional USB Port Headers Guru Clock Connection Header Floppy and IDE Disk Drive Connectors Post Code Display Serial ATA Connectors PCI Express x16 Slot PCI Express x1 SlotsBack Panel Connectors AW8 Bios Setup Press DEL to Enter SetupΜGuru Utility OC GuruBrand Name FrequencyExternal Clock Multiplier FactorEstimated New CPU Clock Strap CPU AsPower Cycle Statistics Abit EQ Beep Control# Temperature Monitoring High/Low Limit # Voltage MonitoringAll Voltages Low Limit # Fan Speed MonitoringCPU/NB/SYS/AUX/OTES FAN Speed # FanEQ Control AUX/OTES FanEQ Control Time hhmmss Standard Cmos FeaturesDate mmddyy # Back to Standard Cmos Features Setup Menu Advanced Bios Features # CPU Feature # Back to Advanced Bios Features Setup Menu Advanced Chipset Features # Back to Advanced Chipset Features Setup Menu # PCI Express Root Port FuncOn-Chip Sata Mode Integrated Peripherals# On-Chip IDE Device IDE Bus MasterSata Port Speed Settings Pata IDE ModeOn-Chip Sata Mode# On-Chip PCI Device # Super-IO DevicePower Management Setup # Onboard PCI DevicePower Button Function WakeUp by AlarmDate of Month Alarm Time hhmmss AlarmPower On Function KB Power on PasswordHot Key Power on Restore On AC Power LossPnP/PCI Configurations Load Fail-Safe Defaults Load Optimized DefaultsSet Password Save & Exit SetupNow., and click Finish to complete setup Appendix a Install Intel Matrix Storage Technology RAID Driver Click Next Click Finish to complete setup Appendix C. Install Audio Driver Appendix C Appendix D. Install BCM LAN Driver Appendix D Appendix E. Install Sil3132 Sata Driver AW8-MAX Click OKAppendix E Appendix F. Install USB 2.0 Driver Appendix F Appendix G. Install Abit µGuru Utility Appendix G Description Appendix H. Post Code DefinitionAward Post Code Definitions Screen logo Auto E8POST.ASM startsInvoke all ISA adapter ROMs AC2005 Post Code Definition Hex Description Power On SequencePower Off Sequence AW8 Series Appendix I. Troubleshooting Need Assistance? Example Main instructions ∋ Technical Support Form Contact Person # Fax Number Mail AddressAppendix J. How to Get Technical Support Product to you firstAppendix J North America Abit Computer U.S.A. Corporation South America Thank You Abit Computer Corporation