Abit IS-20, IS-12, IS-10, IS-11 user manual Front Panel Switches & Indicators Connection Headers

Hardware Setup 2-9

2.4.5.Front Panel Switches & Indicators Connection Headers

These headers are used for connecting switches and LED indicators on the chassis front panel. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection.

•HLED (Pin 1, 3):

Connects to the HDD LED cable of chassis front panel.

•RST (Pin 5, 7):

Connects to the Reset Switch cable of chassis front panel.

•SPK (Pin 15, 17, 19, 21):

Connects to the System Speaker cable of chassis.

•SLED (Pin 2, 4):

Connects to the Suspend LED cable (if there is one) of chassis front panel.

•PWR-ON (Pin 6, 8):

Connects to the Power Switch cable of chassis front panel.

•PLED (Pin 16, 18, 20):

Connects to the Power LED cable of chassis front panel.

User’s Manual