Abit IS-10, IS-12, IS-20, IS-11 user manual Front Panel Audio Connection Header

2-10 Chapter 2

2.4.6.Front Panel Audio Connection Header

This header provides the connection to audio connector located at front panel.

•To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis.

•To use the audio connector at rear panel, disconnect the extension cable, attach the jumpers back at pin 5-6, and pin 9-10 (default setting).

Pin	Pin Assignment	Pin	Pin Assignment
1	Audio Mic.	2	Ground
3	Audio Mic. Bias	4	VCC
5	Speaker Out Right	6	Speaker Out Right
	Channel		Channel Return
7	X	8	NC
9	Speaker Out Left	10	Speaker Out Left
	Channel		Channel Return
11	Ground	12	S/PDIF In
13	VCC	14	S/PDIF Out

IS-10 / IS-11 / IS-12 / IS-20