Abit IS-12, IS-20, IS-10, IS-11 user manual Chapter

Page 44

3-18

Chapter 3

 

 

 

 

Wake-Up by PCI card/LAN

When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or LAN card will cause the system to wake up. The PCI card must support the wake up function.

Power On by Ring

Two options are available: Enabled and Disabled. Default setting is Disabled. If you connect an external modem to the onboard serial port, the system will be turned on when a telephone ring-up occurs.

Resume by Alarm

When set to [Enabled], you can set the date and time you would like the Soft-Off PC to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items. However, if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these items, the system will give priority to the incoming calls or network instead.

Date (of Month)

[0]: This option power-on the system everyday according to the time set in the “Time (hh:mm:ss) Alarm” item.

[1-31]: This option selects a date you would like the system to power-on. The system will power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.

Resume Time (hh:mm:ss)

This item sets the time you would like the system to power-on.

IS-10 / IS-11 / IS-12 / IS-20

Image 44
Contents IS-10/IS-11/IS-12/IS-20 Page Table Of Contents Chapter Chapter Driver InstallationAppendix A. How to Get Technical Support Features & Specifications Miscellaneous Internal I/O ConnectorsExternal I/O Connectors Layout Jumpers & Connectors Description CCMOS1Hardware Setup Install The MotherboardInstall Pentium 4 CPU and Heatsink Supporting-Base Memory Configuration Table System MemoryInstalling and Removing Memory Modules Connectors, Headers, and Switches ATX Power ConnectorsFAN Power Connectors Cmos Memory Clearing Header AGP Display Card Slot IS-10/IS-11/IS-12 Front Panel Switches & Indicators Connection Headers Front Panel Audio Connection Header Additional USB Port Connection Headers System Management Bus Connection Header Additional IEEE1394 Port Connection Headers IS-12 Internal Audio Source Connectors Floppy and IDE Disk Drive Connectors Serial ATA Connectors CPU Core Voltage Selector External I/O Panel Connectors AUDIO1Bios Setup Press DEL to run setupStandard Cmos Features User’s Manual Chapter Page Advanced Bios Features Hyper-Threading TechnologyPage Advanced Chipset Features Dram Timing SelectablePage Integrated Peripherals Onboard IDE DevicePage SATA1 SATA2 Onboard PCI Device SuperIO Device Page Chapter Power Management Setup Chapter PnP/PCI Configurations Force Update EscdChapter PC Health Status Load Fail-Safe Defaults Load Optimized DefaultsSet Supervisor Password Set User PasswordDriver Installation Setup Items Appendix A. How to Get Technical Support Appendix a North America and South America IrelandJapan ShanghaiRussia France, Italy, Spain, Portugal, and Greece Abit Computer CorporationThank You Abit Computer Corporation Technical Support Form