Accell MPC-LNK, MPC-816 Series, MPC series manual MPC-816XC, Mpc-Set Ex, MIO-816K, MIO-248K

MPC-816XC
	MPC-816XC
	(1)
(2)	(3)

Compact Controller 8 Outputs, 16 Inputs

[Characteristics]

This is a single MPC-816 stored in a case. Please use it when you use one CPU board installed directly in an apparatus. Refer to MPC-816K for the specification details.

[Accessories]	(1) Housing (PS-D4C50)	JAE	*1
	(2) Power connector (H4P-SHF-AA)	JST	*1
	(3) Contacts (BHF-001T-0.8SS)	JST	*4

MPC-SET (EX) Compact Controller 16 Outputs, 32 Inputs

SET(EX)	Brain ACCEL
MPC-	FLASH Slide-in
(1)		(3)
(2)		(4)
MIO-816K

CEP-057 MIO-816K

ACCEL CORP

[Characteristics]

This is a combination of MPC-816 and MIF-816 stored in a case. It can be used also as a controller with 16-point output and 32-point input. Also, because simple pulses can be generated (max 60 Kpps) from J5 of MIF, it can be used also as a positioning device.

Refer to MPC-816K and MIF-816K for the specification details.

[Accessories]	(1) Housing (PS-D4C50)	JAE	*2
	(2) Power connector (H4P-SHF-AA)	JST	*1
	(3) Contacts (BHF-001T-0.8SS)	JST	*4
	(4) Connector (HIF-3BA-16D-2.54R)	Hirose	*1

Expanded I/O Board 8 Outputs, 16 Inputs

[Characteristics]

This is an expanded I/O board for MPC. Expansion is possible up to 11 boards. Because all the I/Os are isolated by photocouplers, noise resistivity is high, and each I/O can be used by power sources different from the others. Also, by installing a J2 connector by the user, a small-scale system can be constructed in combination with MPC-816 without using MIF-816.

[Specification]

Power source: DC 12V~24V (for I/O control).

Control I/O: 8-point open collector output, 16-point photocoupler input.

Consumed current: 50 mA.

	(1)	[Accessories]	(1) Housing (PS-D4C50)	JAE	*1
(2)	(3)		(2) Power connector (H4P-SHF-AA)	JST	*1
			(3) Contacts (BHF-001T-0.8SS)	JST	*4
MIO-248K			Expanded I/O Board		24 Outputs, 8 Inputs

ACCEL CORP. MIO-248K CEP-058B

(1)

(2) (3)

[Characteristics]

This is an expanded I/O board for MPC. Expansion is possible up to 11 boards. Because all the I/Os are isolated by photocouplers, noise resistivity is high, and each I/O can be used by power sources different from the others. Also, because it is designed to be compatible with DC 5V, it can also be used as a TTL interface. When used with 5V, a resistor array is added to the SIP socket.

[Specification]

Power source: DC 5V~24V (for I/O control).

Control I/O: 24-point TLP627 photocoupler open collector output,8-point photocoupler input.

Consumed current: 110 mA.

[Accessories]	(1) Housing (PS-D4C50)	JAE	*1
	(2) Power connector (H4P-SHF-AA)	JST	*1
	(3) Contacts (BHF-001T-0.8SS)	JST	*4

-11-