Accell MPC-68K Series manual MPC Peripherals ~ Common for MPC-68K and MPC-816 ~, Cable DOS/V, Ftm

MPC Peripherals ~ Common for MPC-68K and MPC-816 ~

Cable DOS/V 98

[Characteristics]

This is a cable of our company brand to connect MPC and a personal computer. Although the basic cable is for DOS/V, because a 25-pin conversion connector is included, it can also be used for PC98.

FTM

IOD-024

(FTM98 / FTMDOSV / FTMWIN)

[Characteristics]

MPC terminal software “FTMW32”, 816/68K command references, Communication program development support tools, etc. are included.

[Construction] Setup Disk (3.5” 1.44 MB format).

*Other than these, there are FTM versions for NEC98DOS, DOS/V, and English Windows. Please refer to our Business or Technical Department.

I/O Relay Box

CEP-025

ACCEL

[Characteristics]

Because the I/O connector of MPC is compact and has high density, wiring work in a large-scale system is troublesome, and because there is no display of the I/O, debugging is laborsome. IOD-024 connects to the I/O connector of MPC via a flat cable, and branches it point by point to a relay connector. Also, because each point is equipped with an LED, wiring debugging and system maintenance become easy. Also, interfacing a sensor containing a two-line amplifier can be done easily.

(With a case PCML-95W02)

PIF-422

PIF-400

CEP-027 PIF-422

ACCEL

(1)

(2) (3)

[Specification]	Input: 26-pin/50-pin flat cable.
	Output: Molex 5557-04R + 5556TL
[Compatible parts]	Please purchase upon necessity.
Pressure-attaching tool (57027-5000 (Molex))		Extracting tool (57031-6000 (Molex))
Contacts (5556TL (Molex))		Housing (5557-04R (Molex))
Housing (5557-02R (Molex))
	Pulse-Signal Conversion Interface		(Conversion into RS-422 or TTL)
	Pulse-Signal Conversion Interface		(DC 24V Open Collector)

[Characteristics]

In MIF-816 and MPC-68K, the pulse-signal output is not isolated. Therefore, if a driver is directly connected, noise may cause the controller to stall. When a high-noise driver such as an AC servo is connected, please use one of the above conversion interfaces depending on the kind of interface. Although PIF-422 is an RS-422 output, if an SG terminal is connected together, it can deal with 5V TTL-level signals.

(A case sold separately: PCML-60S02)

[Specification]	Power source: DC 12V~24V
	Input: TLP-552
	Output: SN75158P (for 4 axes) (PIF-422)
	DC 24V open collector (PIF_400)
	Consumed current: [70 mA] (PIF-422)
	[30 mA] (PIF-400)
[Accessories]	(1) Connector (HIF-3BA-16D-2.54R)	Hirose	*2
	(2) Power connector (H4P-SHF-AA)	JST	*1
	(3) Contacts (BHF-001T-0.8SS)	JST	*4

-14-