Please Try Controlling by MPC. Your “Device” will Change from That Day.
MPC uses the latest flash ROM! Equipped with an on-board ROM-conversion function, it is a board-type controller with complete protection against noise (RS-232C and pulse generation are also photo-isolated).
MPC is also equipped with complicated commands and functions.
However, multi-axis control is enabled immediately after the power is turned on, as there is simple support by a BASIC-like language.
Programming Device
Your personal computer such as PC98, DOS/V, etc. can be used as is. The file format is in easily- editable ASCII data, which is supported by a terminal software “FTM” (its Windows version is also available).
Language
This is a BASIC-like interpreter. Even a beginner can program immediately. Also, abundant commands make it possible to write complicated applications. Also, although it’s BASIC-like, it’s a full-featured product equipped with multitasking.
I/O Control
Its dedicated I/O realizes 24~768-point control. Both bit processing and parallel processing are supported by dedicated commands, which allows a wide application.
Pulse Generation
MPC-816 and MPC-68K can control a stepping/servo motor of up to 50 and 400 kpps, respectively. Instead of simple support for one axis at a time, commands are prepared for even an XY-orthogonal 4-axis robot that includes palletizing. It can also deal with S-shape acceleration/deceleration.
Necessary Things for Startup
The following are initially necessary to MPC. To be prepared by the customer:
A personal computer (PC98DOS, DOS/V, or Windows) DC24V power (necessary for making MPC work)
Wiring sockets and contacts, a pressure-attaching tool (JAE product) or PS-50SEN-D4T1-1D, etc. Other necessary connectors depend on products. Please refer to the manual.
Connectors ,socket ,and contacts (in the case of individual wires) | |
Control contacts | Pressure-attaching tool | |
| 030-51304-001(JAE) | |
For socket housing(PS-D4C50) | CT150-1-PSSF(JAE) |
Our Products
Cable set (for PC98 and DOS/V compatible machines)
FTM terminal software for programming (for PC98, DOS/V machines, and Windows)
Main unit (must contain MPC-816 or MPC-68K)
Manual (attached at the first purchase)
Selection Guideline
MPC-816 series are inexpensive and compact for controlling up to 4 axes within 50 kpps and I/O 200 points. MPC-68K can be used for controlling multiple axes within 40 kpps and I/O 500 points. Both of them are equipped with RS-232C for the user. Also, MPC-68K can support complicated character processing by a high-level language. The MPC-816 interpreter (TNYFSC®) is a simple language, and the MPC-68K interpreter (ADVFSC®) is a full-featured BASIC language (computation is limited to 4-byte integers). Also, we have MPC- 683 for large-scale high-speed processing and floating-point computation.
