Intermate LX T-04 manual Printout, Example

I n s t a l l a t i o n

3.Set the address switch to position '9' (test printout function).

4.Switch on the printer. The SYSTEM indicator flashes for a few seconds.

The Intermate LX T-04 produces a test printout on the printer, which shows the firmware revision and basic configuration. The default configuration is for a IBM Proprinter emulation.

Printout:

******** TEST PRINTOUT ********

Intermate LX T-04 version: K12-xxxx

Printer Driver #32 IBM Proprinter

IBM Printer Emulation__________ IBM 4214 model 2

System Language________________ 500 International Set 5

ASCII Char. Set________________ PC-858

The default configuration supports Proprinter compatible printers. If you want to change the configuration, you can do this later using Configuration from the System when the Intermate LX T-04 has been installed towards the host. You can also go to Section 3 before continuing with System Attachment.

The test printout shows if the Intermate LX T-04 has been configured for your printer by the dealer/distributor.

Example:

The printout shows that this Intermate LX T-04 has already been configured for another printer:

******** TEST PRINTOUT ********

Intermate LX T-04 version: K12-xxxx

Printer Driver #34 Epson LQ

IBM Printer Emulation__________ IBM 5225 model 1

System Language________________ 500 International Set 5

ASCII Char. Set________________ _PC-850

14 U s e r ‘ s G u i d e