Intermec F4 manual Serial Communication, Baud Rate, Data Bits, Parity, Stop Bits

Page 36

Chapter 6 Setting Up the Printer

Setup Parameters

Serial Communication

•Baud Rate

•Data Bits

•Parity

•Stop Bits

•Protocol

The serial communication parameters control the communication between the printer and the connected computer or other devices on the serial port. The serial communication parameters have no effect on parallel communication.

Make sure the printer’s communication parameters match the setup of the connected device or vice versa. If not, the response from the printer to the host will be garbled.

Baud Rate

The baud rate is the transmission speed in bits per second. There are 8 options:

•1200

•2400

•4800

• 9600

(default)

•19200

•38400

•57600

•115200

Data Bits

This parameter specifies the number of bits that will define a character.

•

7

Characters ASCII 000 to 127 decimal

 

•

8

Characters ASCII 000 to 255 decimal

(default)

Parity

The parity decides how the firmware will check for transmission errors. There are four options:

•None (default)

•Even

•Odd

•Space

Stop Bits

The number of stop bits specifies how many bits will define the end of a character. There are two options:

•

1

(default)

•

2

 

Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 3

35

Page 35 Page 37
Image 36
Page 35 Page 37
Contents EasyCoder F4 Bar Code Label Printer Contents Contents, Appendix FCC Notice United States of America DOC Notice Canada Canadian Dept. of CommunicationMinistère des Communications du Canada GS Notice GermanyDeclaration of Conformity EasyCoder F489/336/EEC and 73/23/EEC Introduction DescriptionChapter Safety Precautions Voltage range. It also contains various signs of approvalInstallation UnpackingFront View Rear View Media Compartment Media Compart- ment, Media Supply Positions Print Mechanism Omitted in dedicated direct thermal printing modelsPower Computer ConnectionsControls and Indicators Control Lamps DisplayKeyboard BeeperSwitching On Starting UpMedia Load Tear-OffTear-Off, Media is guided with a minimum of play Pull downwards Tear-Off with Quick-Load Tear-Off with Quick-Load, Peel-Off Self-stripPeel-Off, Insert the start of the liner under the lip Peel-Off, External Supply Straight-through printing-preferably with Quick-LoadThere is no need to remove the media supply roll post Quality or cause unnecessary wear to the printheadThermal Transfer Printing Ribbon LoadRibbon Load, Setting Up the Printer Ribbon Load, Setting Up the Printer Description Default SetupTest/Service CommunicationSerial Communication Baud RateData Bits ParitySetup Parameters, Serial Communication, ProtocolPrinthead hot Label at strip pin Label skipping PrintingSerial Communication, Protocol, ReadyTest/Service TestprintTest/Service, Media Media TypePaper Type Label LengthDarkest. Default value is 0% Media,Darkness Setup Mode Entering Setup Mode At InstallationNavigating in Setup Mode Setup Mode Overview, Part From previous Press Setup to exit the Setup Mode Options IntroductionDTP Model Integral Liner Takeup UnitInch Adapter Quick-Load Guides Label Taken Sensor Interface Boards Troubleshooting Symptom Possible Cause Remedy Refer toMaintenance Printhead CleaningPrinthead Cleaning, Remove any media and transfer ribbonPrinthead Cleaning, External Cleaning Cleaning the Media Guides Printhead Replacement Printhead Replacement, Printhead Replacement, Adjustments Narrow Media AdjustmentTwo clicks out Three clicks out 12 mmFour clicks out 16 mm Five clicks out 20 mmPrinthead Pressure Ribbon Break Shaft Technical Data Accessories and Options SensorsControls Data InterfacesMedia Specifications Direct Thermal MediaTTR Premium Board TTR High Gloss PolyesterMedia Roll Size CoreRoll Media Non-Adhesive StripMedia, Self-Adhesive Strip⇒ Media Width including liner Maximum 114.3 mm Minimum 23.8 mmSelf-Adhesive Labels Maximum Depends on Dram size Minimum InchesFollowing distances from the inner edge of the media Inches 12 mm 16 mm 20 mmTickets with Gap Min. length between slotsMax. length between slots Depends on Dram size Five fixed positions distance from inner edge of the mediaTickets with Black Mark Maximum Depends on Dram size Minimum 20.0 mm InchesCommon 12.5 mm Inches Minimum MarkTransfer Ribbons Sensitivity Number Setting the Media Sensitivity Number, Type the following command lines and press EnterWhere SIg1,567 sets the media sensitivity number to Media or RibbonSetting the Media Sensitivity Number, Direct Thermal Media Sensitivity SettingsThermal Transfer Media and Ribbon Sensitivity Settings Setting Direct Thermal MediaDefault Communication Setup InterfacesRS-232 Interface Interface Cable Connectors Pin Signal NameIeee BoardEasyLAN 100i Interface Board Supported IPL-3 Commands Supported IPL-3 Commands, Supported IPL-3 Commands, SIF ESCu

F4 specifications

The Intermec F4 is a robust and versatile mobile computer designed to meet the rigorous demands of various industries, including retail, warehouse management, and field service. This device stands out for its impressive combination of durability, performance, and user-friendly features.

One of the main features of the Intermec F4 is its high-performance barcode scanning capability. Equipped with a 1D and 2D barcode scanner, the F4 enables quick and accurate data capture, allowing users to efficiently handle inventory management, order fulfillment, and asset tracking. This capability is essential in environments where accuracy and speed are paramount.

In addition to its scanning features, the Intermec F4 showcases advanced wireless connectivity options. With support for Wi-Fi, Bluetooth, and GSM/GPRS communication, users can stay connected to their networks and devices, ensuring seamless data transmission on the go. This connectivity is crucial for real-time information access and collaboration among team members in the field or warehouse.

The F4 is built with a rugged design that complies with IP54 and MIL-STD-810G standards, which means it can withstand harsh conditions, including dust, moisture, and accidental drops. This durability ensures that the device can operate effectively in demanding environments, reducing the risk of downtime due to equipment failure.

Another notable characteristic of the Intermec F4 is its large, high-resolution touchscreen display. The device features a 4-inch display that is both sunlight-readable and capable of responding to touch even when users are wearing gloves. This ergonomic design enhances the user experience, making it easier for employees to navigate applications and access vital information promptly.

Battery life is also a significant consideration with the Intermec F4. The device comes with an interchangeable battery that supports extended operation, allowing users to work longer without the need for frequent recharging. This feature is especially beneficial in field operations where access to power sources may be limited.

In conclusion, the Intermec F4 is a powerful mobile computing solution that combines advanced scanning technology, wireless connectivity, and rugged durability. Its user-friendly design and efficient performance make it an ideal choice for various applications in logistics, retail, and field services, offering businesses a reliable tool to enhance productivity and streamline operations. By investing in the Intermec F4, organizations can facilitate better inventory management, improve workflow efficiency, and ensure a higher level of accuracy in their processes.
Top Page Image Contents