Intermec 6110 manual Condition Solution Hand-Held

Page 47

SECTION 4

Troubleshooting

Table 4-1 (continued)

Basic Troubleshooting

Condition	Solution
Hand-Held	The printer may be running off
Computer Will	battery power. The printer does not
Not Turn ON	charge the battery in your computer
When Inserted In	when it is running off battery power
A Printer	itself.

The Power	The Power Status LED on the front
Status LED	panel of your hand-held computer
Starts Blinking	informs you of the status of your
	battery pack when it is connected to
	a charging device. The Power Status
	LED reads:
	Off when in a normal operating
	mode;
	Blinking red when the battery is low;
	Continuous red when charging;
	Continuous green when done
	charging;
	Blinking green when in a standby
	mode;

The Charger	The Charger Status LED on the
Status LED	external charging device, used for
Starts Blinking	charging the battery packs, informs
	you of the status of the battery pack.
	The Charging Status LED reads:
	Continuous red for charging;
	Continuous green when done
	charging;
	Blinking red when there is a bad
	connection. Lift the pack out and
	reseat. If it still blinks call Customer
	Service.

6110 Hand-Held Computer User’s Guide 4-3

Image 47

Contents USER’S Guide Acknowledgments Contents Operation Figures Tables Section SectionAbout This User’s Guide Appendix B Hand-Held Computer DescriptionAppendix a Front View Back View Hand-Held Computer Keyboard Backlight BatteryDisplay Main Memory MemoryPC Cards Flash ROMPC Card Slots PC Card Slots Suspend and Resume Key Gold Shift KeyRadio Card Options and AccessoriesResetting Serial PortsIntegrated Scanner Pod Slide the Port Replicator onto the computer as shown Port ReplicatorMagnetic Stripe Reader Serial Pod GSM with SIM card Power source Hand-Held Computer SpecificationsSystem Components Getting Started IntroductionReplace the battery with a similar kind Rechargeable Battery LabelInstalling the Main Battery Your Hand-Held Computer Charging The BatteriesPower Status LED Multipack Charger External SourceSingle Pack Charger Removing the Main Battery Measuring Battery Pack Capacity Backup Battery Life Backup BatteryBios Update Using PC Cards to Load Your ProgramsInstalling PC Cards BootingAccessing the PC Card Slots Removing PC Cards Installing a Modem Card Installing Modem Cable Using the Magnetic Stripe Reader MSR Remove the SIM cover from the hand-held computer Installing the Subscriber Identity Module SIMInstalling SIM Low Battery Indication Routine Care and MaintenanceCase and Display Cleaning Your Hand-Held ComputerDocking Connectors Troubleshooting Are lighting Troubleshooting ChartCondition Solution Hand-Held Not Power Up Computer Does Repair Service Appendix a Connector Pin-OutsPin Signal Function Pin Docking ConnectorPhone Jack Pin-Outs RJ-45 Phone Jack Pin-OutsAppendix a Pop-Up Menus Appendix BEntry Point Drop-Down Lists Network Parameters Alphanumeric FieldsTitle Screen Language Selection Communications Menu appears after the Title Screen Communications MenuOption 1 Begin Comm Session Begin Comm Session with Network Hand-Held Computer User’s Guide B-9 Begin Comm Session with MODEM/DIRECT Begin Comm Session with Interserver Begin Comm Session with Accessory CardESC Session StatusHand-Held Computer User’s Guide B-13 Novell Netware 800 ESC key Appendix B Option 2 Comm Setting Suboption 1 Network Suboption 2 MODEM/DIRECT Suboption 4 Handheld Suboption 5 Remote OPS Suboption 3 Accessory Card Suboption 6 InterserverOption 4 Network Parameters Option 3 Unit IDNetwork Parameters with Nrinet or Tftp Suboption 1 Modem Type Option 4 Modem ParametersNetwork Parameters with Novell Netware Modem Init String Momentarily, the computer displays the modem’s response Suboption 3 BPS Rate Suboption 2 ProtocolSuboption 5 Auto Answer Option 5 Network InterfaceSuboption 4 Data Format Option 5 Phone Number Option 9 Advanced Utilities Suboption 1 SET DATE/TIME Async APIButton Boot Default DriveBootable ATA Bisync BInary SYNChronous communicationsCPU ClickCmos Complementary Metal Oxide Semiconductor ControllerDouble-Click Default DriveDock DOS Disk Operating SystemEOT EepromFSK Frequency Shift Keying ETX End Of TextFlash Flash CardGUI/PM Host Port com4980 Host AddressHost Computer Host ControllerLayer InternetIrDA LAN Local Area NetworkLCD NAK Negative Acknowledgement Native Mode ADKMQL Multi-Quad Lockbox MS-DOS Microsoft Disk Operating SystemNull NmsdNrinet PC Personal Computer Open Wireless LAN NodeOpen Systems Pan BorderPEN*KEY Polled Protocol PenRight Physical PortPixel Plug and PlayProprietary Systems Portrait ModePort Replicator Programmer’s Reference GuideRAS RXD TXD TTYUPC Universal Product Code WirelessUCC Uniform Code Council UCS Uniform Communications StandardIndex Index