Intermec PL4 manual Label Specifications, Memory/Communications Specifications

Memory/Communications Specifications (continued)

Optional wireless	Bluetooth compatible 2.4 GHz link
communications	Wireless LAN capabilities comply with 802.11b
	protocols

Label Specifications

Label/tag width	50.8 mm to 104.1 mm (2 inches to 4.1 inches)
Maximum	508 mm (20 inches) with standard memory
label/tag length
Inter-label gap	2 mm to 4 mm (3 mm preferred)
	0.08 inch to 0.16 inch (0.12 inch preferred)
Label thickness	0.064 mm to 0.165 mm (0.0025 inch to 0.0065
	inch)
Tag thickness	0.152 mm (0.0060 inch) maximum
Label roll size:	66.7 mm (2.625 inch) O.D.
maximum
diameter
Inner core	19 mm (0.75 inch) minimum; 35.05 mm (1.38 inch)
diameter	minimum diameter for linerless media
	Use Intermec-brand direct thermal media that is
	outside wound. Media may be reflective (black mark)
	sensing or transmissive (gap) sensing, die-cut,
	continuous, fanfold, or linerless.
	For die-cut labels, use only full auto dies.
Media	The reflective media black marks should extend past
requirements	the centerline of the roll.
	Minimum Black Mark Dimensions:
	Mark width: 12.7mm (0.5 inch) perpendicular to
	edge of media, centered within the width of the roll.
	Mark length: 2.4 mm (0.094 inch) parallel to edge of
	media.

EasyCoder PL4 Printer User’s Guide 59