Infinity WZR-G300N user manual Configuring a WDS Bridge

Page 68

Configuring a WDS Bridge

The Web-Based Configuration Utility for your first AirStation will open. Click on the Advanced tab.

On the left side menu, click on Wireless Config, and then Basic.

Change the Wireless Channel from Auto to a channel. Make a note of the channel that you’ve chosen, because all of your wireless devices will need to be configured to use this same channel. Change Framebursting from 125 High Speed Mode to Framebursting or Do not use (Framebursting is recommended if all your client devices support it). Click Apply. Your AirStation will reboot in 30-60 seconds. Optional: Note the SSID of this AirStation. By default, this value will be different for each AirStation. For easy roaming, you may want to change the SSIDs of both AirStations to a constant value.

68

Image 68

Contents Nfiniti Wireless Router & AP Table of Contents Table of Contents Connecting to an Existing Network Introduction System RequirementsBasic Setup Getting Ready Connecting your AirStation Log in to the Configuration Tool Detecting Your Broadband Connection Home Aoss Aoss Notes Some things to keep in mind with AossRouter/Access Point Mode Manual Client Configuration System Info AirStation Configuration Tool Home Internet Games Port Mapping Firewall/Intrusion Detector Windows MSN Messinger/UPnP Wireless Encryption Wireless Channel Firmware Update Internet Connection Multisession Reset Advanced Settings WAN Config WAN Port PPPoE LAN Config LAN Port Advanced Dhcp Settings Dhcp Server Manual Assignment of IP Address Network Config Route Info Network Configuration Edit Routing Information NAT NAT Manual Entry IP Filter IP Filter Add/Delete Basic Rules IP Filter Configure IP Filter Network Configuration Intrusion Detector UPnP Aoss 802.11g / Draft-N Basic 802.11g / Draft-N Basic 802.11g / Draft-N Security Bridge/Repeater WDS Bridging MAC Access Limit MAC Access Limit Edit Registration List Advanced SettingsAdmin Configuration Name/Password Admin Config Date/NTP Syslog Transfer Save/Load Configuration Initialize/Reboot Firmware Update System Information Log Information Packet Traffic Information Client Monitor Ping Test Connecting to a Preexisting Network Auto to BRISpecifications WZR-G300N AirStation SpecificationsRegulatory Information AirStation Ieee 802.11 Channel Sets Troubleshooting Common ProblemsDiag LED Activity Table Other Problems Configuring a WDS Bridge Here’s the whole setup, ready for initial configuration Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Configuring a WDS Bridge Troubleshooting WDS Troubleshooting WDS Glossary Glossary Glossary To hardware that requires further manual configuration Glossary Glossary Glossary FCC / CE Information FCC WarningPotential restrictive use Warranty Information Contact Information General InquiriesEmail sales@buffalo-technology.com GPL Information North America GPL Information Europe 125/270* High Speed Mode