Iiyama B1902S, E1902WSV, E1902S Adjustment Item Problem / Option Button to Press Volume

Menu : 3
					M e n u :	3
(Analog)
			1280 × 1024
			H : 8 0 . 0 K H z V : 7 5 . 0 H z
	Adjustment Item			Problem / Option				Button to Press
	Volume	Direct		Too soft
				Too loud
NOTE	is displayed while Mute is active.
	OSD Position			1 2 3 4 5
				You can move the OSD display area
				to any one of the following 5 positions
				within the overall display:
				Press the + Button to move the OSD in numerical order. Press
				the – Button to move the OSD in reverse numerical order.
	OSD Off Timer			Set the OSD Off Timer for 3-60 seconds.
				English	English		Español	Spanish
	Language			Deutsch	German		Italiano	Italian
				Français	French			Japanese
	Signal Select *1	Direct		Auto	Select the signal input automatically.
				Analog	Select the Analog input (D-SUB).
				Digital	Select the Digital input (DVI-D).
	When both Analogue and Digital cables are connected, you can switch between them
NOTE
	using the direct access facility described earlier. If only one input is present, this will
	automatically be selected. In Power Management Mode input switching is disabled.
	Reset			NO	Return to Menu.
				YES	Factory-preset data is restored.
	Return to Menu			Highlight “Menu : 3” again.

*1 Available for ProLite E1902S / E1902WS / B1902S only. Direct See page 14 for Direct adjustment.

ENGLISH

OPERATING THE MONITOR 18