Iiyama E1902S, E1902WSV, B1902S user manual Too soft

OSD Position

OSD Off Timer

ENGLISH

Menu : 2	M e n u : 2
(Digital)
	1280 × 1024
	H : 8 0 . 0 K H z V : 7 5 . 0 H z
Adjustment Item	Problem / Option	Button to Press

Volume	Direct	Too soft
		Too loud
NOTE	is displayed while Mute is active.

1 2 3 4 5

You can move the OSD display area to any one of the following 5 positions

within the overall display:

Press the + Button to move the OSD in numerical order. Press the – Button to move the OSD in reverse numerical order.

Set the OSD Off Timer for 3-60 seconds.

		English	English	Español	Spanish
	Language	Deutsch	German	Italiano	Italian
		Français	French		Japanese
	Signal Select	Auto	Select the signal input automatically.
		Direct	Select the Analog input (D-SUB).
		Analog
		Digital	Select the Digital input (DVI-D).
NOTE	When both Analogue and Digital cables are connected, you can switch between them
	using the direct access facility described earlier. If only one input is present, this will
	automatically be selected. In Power Management Mode input switching is disabled.
	Reset	NO	Return to Menu.
		YES	Factory-preset data is restored.

Return to Menu Highlight “Menu : 2” again.

Direct See page 14 for Direct adjustment.

21 OPERATING THE MONITOR