Iiyama B1902S, E1902WSV, E1902S user manual Do not Touch the Plug with WET Hands

Page 7

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls. Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS

Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

ENGLISH

FOR YOUR SAFETY 2

Image 7
Contents English Deutsch Francais Nederlands Congratulations Electromagnetic fields Noise emissions FCC Declaration of Conformity Table of Contents Safety Precautions For Your SafetyDo not Touch the Plug with WET Hands Cleaning Customer ServiceSpecial Notes on LCD Monitors Before YOU Operate the Monitor FeaturesChecking the Contents of the Package ProLite E1902S / E1902WS / E1902WSV Fitting and Removal of BaseControls and Connectors ProLite E1902S / E1902WS / E1902WSV Controls and Connectors ProLite B1902S Fitting of Cable Holder Connecting Your MonitorConnecting Your Monitor ProLite B1902S Adjusting the Viewing Angle Computer SettingPanel Rotation ProLite B1902S Adjusting the Height and the Viewing Angle ProLite B1902SOperating the Monitor Adjustment Menu Contents N u Menu Analog Adjustment Item Problem / Option Button to Press Volume N u English Too soft Adjustment pattern Screen AdjustmentsEnglish English Power Management Feature Trouble Shooting Sound is too Appendix Specifications ProLite E1902SSpecifications ProLite E1902WS Specifications ProLite E1902WSV Specifications ProLite B1902S Dimensions ProLite E1902WS / E1902WSV Dimensions ProLite E1902SDimensions ProLite B1902S Vesa XGA Compliant TimingGround Connector PIN Assignment