FITTING AND REMOVAL OF BASE : ProLite E1906S
CAUTION Install the stand on a stable surface. The monitor may cause injury or damage if it falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Installation>
APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
BHold the monitor and push the
Stand
ENGLISH
<Remove>
APut a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay the monitor flat on a table with front face down.
BPress the stopper at the bottom of the stand and remove the
Stopper
Stand
BEFORE YOU OPERATE THE MONITOR 6