Iiyama E1906S, B1906S user manual Special Notes on LCD Monitors, Customer Service, Cleaning

Page 8

ENGLISH

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.

Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

CUSTOMER SERVICE

NOTE

The fluorescent light used in the LCD monitor may have to be periodically replaced.

 

For the warranty coverage on this component, please check with local iiyama service

 

center.

 

If you have to return your unit for service and the original packaging has been

 

discarded, please contact your dealer or iiyama service center for advice or

 

replacement packaging.

CLEANING

WARNING

CAUTION

NOTE

CABINET

LCD SCREEN

If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

For safety reasons, turn off the power switch and unplug the monitor before you clean it.

To protect the LCD panel, do not scratch or rub the screen with a hard object.

Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.

Thinner

Spray-type cleaner

Benzine

Wax

Abrasive cleaner

Acid or Alkaline solvent

Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

Periodic cleaning with a soft dry cloth is recommended.

Don't use tissue paper etc. because these will damage the LCD screen.

3 FOR YOUR SAFETY

Image 8
Contents English English Congratulations CE Marking Declaration of Conformity Table of Contents For Your Safety Safety PrecautionsOthers Special Notes on LCD Monitors Customer ServiceCleaning Before YOU Operate the Monitor FeaturesCheking the Contents of the Package Installation Fitting and Removal of Base ProLite B1906SFitting and Removal of Base ProLite E1906S RemoveControls and Connectors ProLite B1906S Controls and Connectors ProLite E1906S Connecting Your Monitor ProLite B1906S Example of Connection BackConnecting Your Monitor ProLite E1906S Computer Setting Adjusting the Viewing Angle ProLite E1906SAdjusting the Height and the Viewing Angle ProLite B1906S Panel Rotation ProLite B1906SOperating the Monitor Adjustment Menu Contents DirectImage Setup Color Temp OSD Setup Others DVI-DScreen Adjustments Screen Adjustments English English Power Management Feature Trouble Shooting Problem CheckRecycling Information Specifications ProLite B1906S AppendixVesa DDC2B TM TCO5.2, CE, TÜV-GS, VCCI-B, CUSpecifications ProLite E1906S Vesa DDC2BTMDimensions ProLite B1906S Dimensions ProLite E1906SCompliant Timing