Iiyama B1906S, E1906S user manual Others

Page 7

CAUTION

INSTALLATION LOCATION

Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.

DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION

The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

MAINTAIN GOOD VENTILATION

Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.

Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.

UNPLUG THE MONITOR

If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.

HOLD THE PLUG WHEN DISCONNECTING

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.

DO NOT TOUCH THE PLUG WITH WET HANDS

Pulling or inserting the plug with wet hands may cause electric shock.

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.

CARE TO A HAND AND FINGERS!

Careful attention is required not to catch your fingers or hands when you change the height or the angle.

Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height. (Just for height adjustable model.)

DO NOT USE THE MONITOR FOR 24-HOURS CONTINUOUSLY

The monitor is not designed to work for 24-hours continuously, do not use the monitor for 24-hours continuously.

OTHERS

ERGONOMIC RECOMMENDATIONS

To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.

ENGLISH

FOR YOUR SAFETY 2

Image 7
Contents English English Congratulations CE Marking Declaration of Conformity Table of Contents Safety Precautions For Your SafetyOthers Cleaning Customer ServiceSpecial Notes on LCD Monitors Cheking the Contents of the Package FeaturesBefore YOU Operate the Monitor Fitting and Removal of Base ProLite B1906S InstallationRemove Fitting and Removal of Base ProLite E1906SControls and Connectors ProLite B1906S Controls and Connectors ProLite E1906S Example of Connection Back Connecting Your Monitor ProLite B1906SConnecting Your Monitor ProLite E1906S Adjusting the Viewing Angle ProLite E1906S Computer SettingPanel Rotation ProLite B1906S Adjusting the Height and the Viewing Angle ProLite B1906SOperating the Monitor Direct Adjustment Menu ContentsImage Setup Color Temp OSD Setup DVI-D OthersScreen Adjustments Screen Adjustments English English Power Management Feature Problem Check Trouble ShootingRecycling Information TCO5.2, CE, TÜV-GS, VCCI-B, CU Specifications ProLite B1906SAppendix Vesa DDC2B TMVesa DDC2BTM Specifications ProLite E1906SDimensions ProLite E1906S Dimensions ProLite B1906SCompliant Timing