OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS.
( Press the Menu Button to start the On Screen Display feature. There are additional menu pages which can be switched by using the 
/
Buttons.
ENGLISH
Adjustment icon 
1280x1024 ANALOG
CONTRAST
BRIGHTNESS
VOLUME
AUTO TUNE
LANGUAGE
EXIT
EXITSELECT
Page | Menu page |
BUse the +/– Buttons to make the appropriate adjustment or setting.
For example, to correct for vertical position, press the Menu Button. Then, select 
(V- POSITION) by using the 
/
Buttons.
Use the +/– Buttons to change the vertical position settings. The vertical position of the overall display should be changing accordingly while you are doing this.
The bar shows the progress of the 
adjustment being made.
1280x1024 ANALOG
CONTRAST
BRIGHTNESS
VOLUME
AUTO TUNE
LANGUAGE
EXIT
EXITSELECT
Page 
NOTE |
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning off the power should be avoided while using the Menu.
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these adjustments, all other adjustments have only one setting which applies to all signal timings.
Direct
zKey Lock Mode:
With the power is off, press the 
Button while pressing the Power Switch will switch the Key Lock Mode On to Off. Adjustment items are locked out when the Key Lock Mode is active.
9 OPERATING THE MONITOR