TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1.Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.
2.Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists.
3.If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem | Check |
A The picture does |
|
not appear. |
|
(Power indicator | The Power Cable is firmly seated in the socket. |
does not light up.) The Power Switch is turned ON. | |
| The AC socket is live. Please check with another piece of equipment. |
(Power indicator | If the blank screen saver is in active mode, touch the keyboard or the |
is green.) | mouse. |
| Increase the Contrast and/or Back Light level. |
| The computer is ON. |
| The Signal Cable is properly connected. |
| The signal timing of the computer is within the specification of the monitor. |
(Power indicator | If the monitor is in power management mode, touch the keyboard or the |
is orange.) | mouse. |
| The computer is ON. |
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
B The screen is not The Signal Cable is properly connected.
synchronized. The signal timing of the computer is within the specification of the monitor.
The video output level of the computer is within the specification of the monitor.
C The screen | The signal timing of the computer is within the specification of the monitor. |
position is not in |
|
the center. |
|
D The screen is | The video output level of the computer is within the specification of the |
too bright or too | monitor. |
dark. |
|
E The screen is | The power voltage is within the specification of the monitor. |
shaking. | The signal timing of the computer is within the specification of the monitor. |
F The touch | The |
screen shows | Touch screen driver software is installed. |
no response. |
|
G The touch | The calibration function set up correctly. |
position does not |
|
deviate. |
|
ENGLISH
TROUBLE SHOOTING 16