Iiyama PLT1500, PLT1900, PLT1700 Special Notes on LCD Monitors, Customer Service, Cleaning

Page 6

ENGLISH

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitors and do not indicate a problem.

NOTE

„ When you first turn on the LCD monitor, the picture may not fit in the display area

 

because of the type of computer that is used. In this case, adjust the picture

 

position to the correct position.

 

„ Due to the nature of the backlight, the screen may flicker during initial use. Turn off

 

the Power Switch and then turn it on again to make sure the flicker disappears.

 

„ You may find slightly uneven brightness on the screen depending on the desktop

 

pattern you use.

 

„ Due to the nature of the LCD screen, an afterimage of the previous screen may

 

remain after switching the image, when the same image is displayed for hours. In

 

this case, the screen is recovered slowly by changing the image or turning off the

 

Power Switch for hours. There is the possibility that the previous screen has been

 

fixed. Pay attention sufficient when you use LCD Monitor.

 

„ Contact your dealer or iiyama service center for the backlight replacement when the

 

screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.

 

„ Condensation may appear between Touch screen and LCD screen. It is the natural

 

phenomenon and it is not a malfunction.

 

Condensation disappears with slowly warming the whole unit.

 

Non condensing when the unit is in-use, it will cause defective symptoms.

CUSTOMER SERVICE

NOTE

„ The fluorescent light used in the LCD monitor may have to be periodically replaced. For the

 

warranty coverage on this component, please check with local iiyama service center.

 

„ If you have to return your unit for service and the original packaging has been discarded,

 

please contact your dealer or iiyama service center for advice or replacement packaging.

CLEANING

WARNING

CAUTION

NOTE

CABINET

LCD SCREEN

„If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.

„For safety reasons, turn off the power switch and unplug the monitor before you clean it.

„To protect the LCD panel, do not scratch or rub the screen with a hard object.

„Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.

Thinner

Spray-type cleaner

Benzine

Wax

Abrasive cleaner

Acid or Alkaline solvent

„Touching the cabinet and the LCD screen with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet and the LCD screen.

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.

Periodic cleaning with a soft dry cloth is recommended.

Don’t use tissue paper etc. because these will damage the LCD screen.

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the touch screen with a soft dry cloth. Don’t pour the detergent solvent on the touch screen.

3 FOR YOUR SAFETY

Image 6
Contents Thank you very much for choosing the iiyama LCD monitor FCC Declaration of Conformity Table of Contents For Your Safety Safety PrecautionsDo not Touch the Plug with WET Hands Customer Service CleaningSpecial Notes on LCD Monitors Features Before YOU Operate the MonitorSpecial Notes on Touch Panel Checking the Contents of the Package Wall MountingControls and Connectors Connecting Your Monitor Computer Setting Adjusting the Viewing AngleOperating the Monitor DirectAdjustment Menu Contents 2 Analog Input Digital Input Screen Adjustments English Power Management Feature Trouble Shooting Problem CheckSpecifications ProLite T1530SR AppendixSpecifications ProLite T1730SR Specifications ProLite T1930SR „ ProLite T1730SR Dimensions„ ProLite T1530SR „ ProLite T1930SRCompliant Timing VGA Text