3
Using the Quick Check 890 Verifier
System
Scanning a Barcode Symbol Using the QC890 Verifier
!proper initial calibration, the values displayed may not be accurate. Please be sure to calibrate the QC890 Verifier prior to scanning barcodes and when you change apertures and/or external scanning devices.
1.Place the QC890 Verifier on top of the symbol.
2.Press the scan button on top of the unit to turn on illumination. Look through the unit’s window to align the unit with the barcode.Calibration is a requirement of the ISO/IEC standards. Without
Note: The best verification data is gathered by aligning the center of the symbol to the center arrows.
3.Press the scan button on top of the unit again while the illumination is on to scan and verify the barcode.
4.To scan PDF417 barcodes, hold the scan button down and move the verifier up and down so the aiming line sweeps from the top of the bar code to the bottom, and back up. This ensures that the entire code is scanned.
Scanning a Barcode Symbol Using Quick Check ImageData
1.Place the QC890 Verifier on top of the symbol.
2.If necessary, press the scan button on top of the unit to turn on illumination to aid in alignment of the symbol.
3.For the PC version, click the Scan button on the Main Display window.