HandHeld Entertainment Quick Check 890 manual Scanning Properly Using a Pen/Mouse Wand

illumination will turn off. If the calibration process is successful, the following screen displays:

4.Enter your name and the location where the calibration was performed and click on OK. The following screen displays:

5.If the unit does not calibrate, contact Hand Held Products Technical Support (see Technical Assistance on page 5-1).

To access calibration logs, go to Settings->Calibration->Calibration Log. Enter the password visions07.

Scanning Properly Using a Pen/Mouse Wand

Note: It is important to perform reflectance calibration prior to using any pen or mouse wand. See "Calibrating an External Pen/Mouse Wand" on page 3-4.

1.Turn on the verifier and confirm that the pen/mouse wand is securely connected.

2.Hold the pen wand as you would a pen or pencil, placing your fingers on each side of the foot near the tip:

or

Quick Check® 890 User’s Guide 3 - 3