Technical Specifications
Introduction | 1 |
Technical Specifications
Please be aware of the following before connecting the interface module.
Warning! Changes or modifications to the interface module not expressly approved by Gilson could void the
The interface module has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC commercial environment. The system interface generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause harmful interference; in which case, the user will be required to correct the interference at the user’s own expense.
Shielded cables must be used with the interface module to ensure compliance with the Class A FCC limits.
Technical Specification | Definition |
|
|
Baud rate | 19200 |
|
|
Environmental conditions | Indoor use |
| Altitude: up to 2000 m |
| Temperature range: |
| Air pressure: |
| Pollution degree: 1 or 2, in accordance with IEC 66 |
| Humidity: Maximum relative humidity 80% for |
| temperatures up to 31°C, decreasing linearly to |
| 50% relative humidity at 40°C |
|
|
Front panel | LED indicator lights for |
|
|
Manufacturing standards | Meets applicable Safety and EMC certification |
| standards; UL and CE certified. |
|
|
Physical space requirement | 9.4 x 5.5 x 4 cm (3.7 x 2.2 x 1.6 in) |
(W x D x H) |
|
|
|
Power requirements | +12V DC at 50 mA supplied via a 2.1 mm ID power |
| plug. Center contact is positive. |
|
|
Weight | 0.14 kg (0.3 lb) |
|
|
Gilson 508 Interface Module User’s Guide |