BIOS |
|
|
|
|
|
Typematic Rate Setting: This determines the keystrokes repeat rate. The default is Disabled.
Enabled: Allows typematic rate and typematic delay programming.
Disabled: The typematic rate and typematic delay will be controlled by the keyboard controller in your system.
Typematic Rate (Chars/Sec): This is the number of characters that will be repeated by a keyboard press. The default is 6.
6: | 6 characters per second. | 8: | 8 characters per second. |
10: | 10 characters per second. | 12: | 12 characters per second. |
15: | 15 characters per second. | 20: | 20 characters per second. |
24: | 24 characters per second. | 30: | 30 characters per second. |
Typematic Delay (msec): This setting controls the time between the first and the second character displayed by typematic
250: 250 msec.
500: 500 msec.
750: 750 msec.
1000: 1000 msec.
Security Option: This category allows you to limit access to the System and Setup, or just to Setup. The default is Setup.
System: The system will not boot and the access to Setup will be denied if the correct password is not entered at the prompt.
Setup: The system will boot; but the access to Setup will be denied if the incorrect password is not entered at the prompt.
OS Select For DRAM > 64MB: Some operating systems require special handling. Use this option only if your system has greater than 64MB of memory. The default is
OS2: Select this if you are running the OS/2 operating system with greater than 64MB of RAM.
Video BIOS Shadow: This option allows video BIOS to be copied into RAM. Video Shadowing will increase the video performance of your system.
The default is Enabled.
Page