| BIOS |
|
|
|
|
Delay 4 Second : Turns off the system after a 4 second delay. If momentary press of button, the system will go into Suspend Mode. Press the power botton again to take system out of Suspend Mode.
VGA: When set to On (default), any event occurring at a VGA port will awaken a system which has been powered down.
LPT & COM: When set to On (default), any event occurring at a COM(serial)/ LPT (printer) port will awaken a system which has been powered down.
HDD & FDD: When set to On (default), any event occurring at a hard or floppy drive port will awaken a system which has been powered down.
PCI Card: When set to On (default), any event occurring to the DMA controller will awaken a system which has been powered down.
Wake Up On LAN/Ring: When set to Enabled, any event occurring to the Modem Ring will LAN awaken a system which has been powered down.
RTC Alarm Resume: When set to Enable rtc alarm resume, you could set the date (of month) and timer (hh:mm:ss), any event occurring at will awaken a system which has been powered down.
Primary INTR: When set to On (default), any event occurring at will awaken a system which has been powered down.
Page