BIOS |
|
|
|
|
|
4-6 PNP/PCI Configuration
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ’s may cause the system to not find certain devices.
Figure 7: PCI Configuration Setup
PNP OS Installed: Do you have a PNP OS installed on your system. The default is No.
Yes: Select if you are using a PNP OS.
No: Select if your OS does not support PNP.
Resources Controlled By: Who controlled the system PNP/PCI resources. The default is Auto.
Manual: PNP Card’s resources will be controlled manually. You can set which
Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign the interrupt resource automatically.
Reset Configuration Data: This setting allows you to clear ESCD data. The default is Disabled
Page