LM914
HOW TO ADJUST A SETTING
1.Press the
2.Press 
or 
to select the desired function. See figure 5.
3.Press the
4.Press 
or 
to adjust the selected function.
Note: 
is used to adjust the function down & 
is used to adjust the function up. This is due to the orientation of the adjustment level bar.
5.When the OSD window is active, it shows the input signal timing. The "H" stands for the horizontal frequency and "V" for the vertical frequency.
6.To exit and save, select the exit function, or leave the monitor alone for 10 seconds. If you want to adjust another function press MENU again and repeat steps
Figure 5 The OSD Message
13