Envision Peripherals LM914 Before YOU Operate the Monitor, Special Notes on LCD Monitors

Page 5

LM914

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

BEFORE YOU OPERATE THE MONITOR

FEATURES

48cm(19”) TFT Color LCD Monitor

Crisp, Clear Display for Windows

Recommened Resolutions: 1280 X 1024 @ 60Hz

EPA ENERGY STAR®

Dual Input (DVI + Analog)

2W+2W Stereo Speakers

Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

1.LCD Monitor

2.15-pin D-Sub Cable

3.DVI Cable

4.Power Cord

5.PC Stereo Cable

6.External Power Adapter

7.Driver Disk

8.Quick Start Guide (QSG)

9.Warranty, Notices, Warnings & Precautions Booklet

9.Input Not Supported Solution Sheet

4

Image 5
Contents LCD Monitor LM914FCC Class B Radio Frequency Interference Statement Precautions PrecautionsLM914 Checking the Contents of the Package FeaturesBefore YOU Operate the Monitor Special Notes on LCD MonitorsPowercord Installation InstructionsPower Source Swivel BasePreparing to Install the Cables Installations InstructionsCable Connections Installation InstructionsLM914 Attaching The Optional Wall Mount Arm not supplied Adjusting the Viewing AngleLM914 External Controls Operating InstructionsGeneral Instructions Power Indicator Auto Adjust button / ExitVolume Control Front Panel ControlOSD Message HOW to Adjust a SettingAdjusting the Picture Plug and Play Plug & Play DDC1/2B FeatureUsing the Right Power Cord Technical Support FAQ LM914 No Signal Error Message & Possible SolutionUnsupported Mode TRY Different Video Card Setting ResolutionLM914 For First Time Install HOW to Install the DRIVER-DISK INF & ICM FileAppendix SpecificationsUL, CSA, FCC, T ÜV/GS, CE VGA Factory Preset Timing TablePIN no Description PI N no Connector PIN AssignmentTmds Data Warranty Statement LM914