Envision Peripherals LM914 user manual Cable Connections, Installation Instructions

LM914

CABLE CONNECTIONS

1 – Connect the DC-jack power cable into DC-IN connector on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

3.(Optional – Requires a video card with DVI port) Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port. be tightened.

4.(Optional) - Connect the audio cable between the monitor’s audio input & the computer sound card’s audio output (green port).

5.Connect the female end of the power cord to the monitor’s power adapter and connect the male end of the power cord to the AC outlet.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

6.(Optional – Headphone not included) – Connect a headphone to the monitor’s headphone jack.

	Figure 2 - Connecting Cables
1.	External Adapter	5.	Power Cord
2.	15-pin D-Sub Cable	6.	Headphone (Not Included)

3.DVI Cable

4.Audio Cable

INSTALLATION INSTRUCTIONS (cont)

7