Envision Peripherals G2219 General Instructions, External Controls, Source, +/Dcr, Menu /ENTER

Page 9

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located on the side of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.

•The power cord should be connected.

•Connect the video cable from the monitor to the video card.

•Press the power button to turn on the monitor. The power indicator will light up.

Figure 4 External Control Button

EXTERNAL CONTROLS

1.	SOURCE
2.	Auto Adjust button / Exit
3.	-/Eco mode
4.	+/DCR
5.	MENU /ENTER
6.	Power button

8

Image 9

Contents Page Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Features Checking the Contents of the PackageSpecial Notes on LCD Monitors Installation Instructions Swivel Base Power CordPower Source SUB Controls and Connectors Signal CableAdjusting the Viewing Angle External Controls General InstructionsSource +/DCRPower Indicator Auto Adjust button / ExitFront Panel Control OSD Message HOW to Adjust a SettingMain Sub Menu Description Menu Item Icon Adjusting the PictureClock Adjust Picture Clock Reduce Vertical-Line noise Full On or off Disable or Enable Full Enhance OSD Plug and PlayDVI DDC/CIPlug & Play DDC2B Feature Blue Technical Support FAQPage Input not Support Error Message & Possible Solution No SignalSpecifications TTLVesa DDC2BTM CCC MenuFactory Preset Timing Table PIN no Description Connector PIN AssignmentISO 14001 Certification