FRONT PANEL CONTROL
• Power Button:
Press this button to switch ON/OFF of monitor’s power.
• Power Indicator:
Green — Power On mode.
Orange
•MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in Contrast /Brightness OSD status.
•SOURCE:
Press this button to switch ON/OFF of DCR.
•
Press the Eco key continuously to select the Eco mode when there is no OSD .
•+/DCR :
Press DCR key continuously to active or disable DCR function when there is no OSD.
•Auto Adjust button / Exit:
1.When OSD menu is in active status, this button will act as
2.When OSD menu is in off status, press this button to activate the Auto Adjustment function.
The Auto Adjustment function is used to optimized the HPos, VPos, Clock and Focus.
OSD Lock Function:
To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To
NOTES
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
• Do not scratch the screen with hard things, it may cause permanent damage.
• Don’t leak liquid into monitor which will result in the damage of component.
9