Energizer EN1100 manual Best use of Battery Power, Troubleshooting Problem No Input Voltage

Page 13

Best use of Battery Power

Make sure any appliances are energy efficient and turned off after use. Use Compact Florescent Lamps. Wherever possible, charge with Solar Panels or Wind Generators. Do not allow lead acid batteries to remain discharged for long periods of time, they lose capacity (amp hours).

Disposal / Recycling of Inverter / California Proposition 65

Electronic products are known to contain materials that are toxic if improperly disposed. Contact local authorities for disposal and recycling information.

This inverter is certified to be “lead free.” Transformers in this inverter contain nickel composites. Nickel is a known neuro-toxin if ingested.

Troubleshooting

PROBLEM: No Input Voltage

Reason

Solution

 

 

Poor contact with battery

Shut down inverter and

disconnect. Clean terminals

terminals.

thoroughly and reconnect.

 

 

Turn off inverter. Fix problem.

Blown DC battery fuse(s).

Replace fuse(s) with same type

 

and rating.

 

 

PROBLEM: Inverter is Shut Down

Reason

Solution

 

 

Battery voltage below 10

Charge or replace battery.

Volts.

 

Inverter is too hot (thermal

Allow inverter to cool. Check

for adequate ventilation. Re-

shut down mode). Will be

duce the load on the inverter

indicated on LCD panel.

to rated continuous power.

 

Unit may be defective.

See warranty and call

customer service.

 

 

 

13

Image 13
Contents Page Higher Wattage Inverter May Be Required WelcomeAppliance Cautions Getting Started Page Front Panel EN900 / EN1100 LCD DiagramRear Panel EN900 / EN1100 Determining the DC Power RequirementsSizing the Battery Bank Cable Gauges Mounting the Inverter Connecting the InverterTelevision and Audio Suggestions OperationPage Troubleshooting Problem No Input Voltage Best use of Battery PowerProblem Inverter is Shut Down Problem TV does not Work Problem Low Battery Alarm on all the TimeSpecifications Description Specifications EN900Specifications EN1100 Warranty and Return Warranty by PowerBright Exclusions Return Procedure Return Material Authorization Policy