Installation 5
Installation
This chapter will assist you to get your monitor working as quickly as possible. It takes just a few straightforward maneuvers to connect the monitor to your computer. Before you start please carefully read the safety and operating hints below.
Use the power cord supplied to connect the monitor. In order to avoid electric shock, the power cord must be connected to a properly grounded plug.
Do not on any account open up the appliance to carry out your own repairs.
Very high voltages exist within the appliance, even when disconnected from the mains. Repairs should only be made by trained technicians. Please contact ELSA Services for any repairs.
Do not locate the monitor close to sources of electromagnetism. These can include halo- gen desk lamps or electric motors, but can also include high voltage cables or steel pil- lars. Magnetic or electromagnetic radiation causes picture distortion and can eventually cause your monitor to fail.
Ensure that your monitor has sufficient ventilation. The air vents on your monitor must not be obstructed. Heat produced from the picture tube must be allowed to escape freely.
Protect the monitor from damp and dust. Damp can cause short circuits, and a
The power cord must be unobstructed. Avoid allowing heavy objects to stand on it.
English