Directed Video GM100 manual Choke Installation Diagram

Page 6

6

Black male pin plug (12 pin)

To CAS-F12

Flat light-gray

male pin plug (24 pin)

From car

CAS-G7i

Yellow wire

Red wire

OUT

CHOKE

FILTER

IN

Red wire

Yellow wire

Black male pin plug (12 pin)

Black wire

Cut the black and yellow wire and add a choke filter

Black wire

Dark-gray female pin plug (24 pin)

To radio

Choke Installation Diagram

© 2005 Directed Electronics—

Light-gray

male pin plug (12 pin)

Black female pin plug (12 pin)

Connect the cut YELLOW wire to the RED wire of choke filter.

Connect the cut BLACK wire to the BLACK wire of choke filter.

all rights reserved

NOTE:

Due to differences in equipment and vehicles system noise may vary. Included with the system is an optional choke filter. Please install per the diagram above if excess noise is present.

Image 6
Contents GM100 GM OE Interface to RSE Port Non-Transferable Limited Consumer Warranty Table of Contents IntroductionWhat’s Included Installation Refer to the Installation Diagram belowApplications Installation Diagram Choke Installation Diagram Operation OptionCompany behind this system is Directed Electronics