Hitachi UT32X802 Safety Precautions Floor Stand Setup, Install the Monitor on the Floor Stand

SAFETY PRECAUTIONS (continued)

Floor Stand Setup

1 Remove the Stand Base from the Monitor

Keep the screws. They will CAUTION be used for the Floor stand

installation.

Remove the 4 screws and raise straight up from tabletop stand.

2 Install the Monitor on the Floor Stand

Monitor

About the Installation

This product is heavy and should be carried by at least 2 people.

For Stand Assembly; please refer to the Installation Manual of the Floor Stand AS-LSZ0081 or AS-LSZ0082.

3	Attach the Monitor to the Floor Stand with the 4 screws used with the
	tabletop stand.

Adjust Monitor position left or CAUTION right to match with screw holes.

If the screw holes do not align, the Monitor may be damaged.

WARNING	Please make sure screws
	are tightened properly.
	Screws from the
	tabletop stand.

ENGLISH

CAUTION

UT32X802 LCD Monitor is for use with Hitachi AS-LSZ0081 or AS-LSZ0082 Floor stand only. Use with other floor stands could cause instability and possible injury.

12