Hitachi UT32X802 manual Connection, Connect the Power Plug into the Wall Socket

CONNECTION (continued)

3.Attach Cushion, Secure with Clamps and Fit Terminal Cover (continued)

3 Secure the HDMI cable and power cord with clamps.

Clamp

4 Fit the terminal cover onto the monitor.

Insert the tabs into the slots as shown and fold downward to fit the terminal cover.

Tabs

Terminal Cover

How to remove the cover.

Using your fingers, pull backwards to lift the cover.

4. Connect the Power Plug into the Wall Socket

Connect the power cord after completing all other connections.	Monitor
	Rear	AC
(For some countries the type of plug is different that depicted.)	Panel	Wall
		Socket

CAUTION

Use only the power cord provided.

Do not use a power supply voltage other than that indicated (AC120, 60Hz). It may cause fire or electric shock.

For the LCD monitor, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to connect the power cord to a three-pin grounded outlet and make sure that the cord is properly grounded. If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.

Ensure that both ends of the power cord are easily accessible.

If you have to change the power cord, please use a certified power cord that meets your region’s safety standards.

21