FUNCTION (continued)
Power Save Mode
When HDMI/Composite Input is Selected
You are provided the function to save power consumption when no signal is detected in the HDMI/Composite input. Set to On in “Video Power Save” from the Setup Menu, which leads to the power save mode.
1.Press the 
button when in HDMI/Composite mode.
2.Select the “Setup” menu and press the OK button.
3.Select “Video Power Save”.
Video Power Save | Off | |
On | ||
|
Setup |
|
| Off | ||
| Video Power Save |
| |||
| RGB Input |
|
| RGB | |
| Color System |
| Auto | ||
| Select | On/Off |
|
| Return |
|
|
| |||
|
|
|
|
|
|
ENGLISH
When no signal is detected | When signal is input during | |
Condition | Indicating Lamp | On in “Video Power Save” |
Power Save | Orange | Turns On automatically. |
|
|
|
When RGB Input is Selected
When the unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set to be activated automatically when the computer is not being used, in order to reduce the power consumption of the unit.
RGB sync signal | Horizontal | Yes | No |
| Yes |
| No |
Vertical | Yes | Yes |
| No |
| No | |
|
|
| |||||
PC signal | Active (normal display) |
| Blank (no display) |
| |||
Operation mode | On |
|
| Off |
| ||
Indicating lamp | Lights green |
|
| Lights orange |
| ||
To return to operating status, operate the personal computer, or press either the Input Select button on the control
panel or the 
or 
button on the remote control.
44
