Dell AP-92, W- AP92, W-AP105, AP-175, W-AP93 manual AP-93 Indicator LEDs Label Function Action Status

The plastic case physically encloses the complete set of hardware and software components and represents the cryptographic boundary of the module.

The Access Point configuration tested during the cryptographic module testing included:

Aruba Part Number	Dell Corresponding Part Number
AP-93-F1	W-AP93-F1

The exact firmware versions tested were:

∙ArubaOS_6xx_6.1.2.3-FIPS

∙Dell_PCW_6xx_6.1.2.3-FIPS

2.2.1.1Dimensions/Weight

The AP has the following physical dimensions:

∙120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")

∙255 g (9 oz)

2.2.1.2Interfaces

The module provides the following network interfaces:

∙1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX

∙Antenna (internal)

∙1 x RJ-45 console interface

The module provides the following power interfaces:

∙48 V DC 802.3af power over Ethernet

∙12 V DC for external AC supplied power (adapter sold separately)

2.2.1.3Indicator LEDs

There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:

Table 3- AP-93 Indicator LEDs

Label	Function	Action	Status
PWR	AP power / ready status	Off	No power to AP
		Red	Initial power-up condition
		Flashing – Green	Device booting, not ready
		On – Green	Device ready
ENET	Ethernet Network Link	Off	Ethernet link unavailable
	Status / Activity
		On – Amber	10/100Mbs	Ethernet	link
			negotiated
		On – Green	1000Mbs Ethernet link negotiated

10