Dell 5400+, 5600+ manual Configure the Port

AXIS 5400+/AXIS 5600+ User’s Guide 19

15.Enter the IP address or host name of your print server (Example: 192.168.3.191)

In the Logical Printer Name field, enter the port you wish to use; LPT1, LPT2 or COM1. Click OK.

16.The TCP/IP port will then be added automatically to the list of available ports. Click Apply and OK.

17.You may now configure the port, as described below. The Axis Printer Port is now installed.

Configure the Port:

1.Select Settings Printers from the Start menu and highlight the printer you wish to configure. Select File Properties Details and click Port Settings.

2.Choose whether error condition pop-up messages are to be displayed by checking the box in the Configure AXIS Ports dialog. Define the frequency at which the error messages should be displayed after retry. Click OK.

Note:

Even if the desired printer is available in the Manufacturers and Printers lists, you are advised to use the print driver provided with the printer. This assures you of the latest driver software.

If you need additional information, refer to the AXIS 5400+/AXIS 5600+ User’s Manual on www.axis.com

Proceed to Print Server Management and Configuration on page 23 for information on supported management and configuration tools.

English