Dell C600 service manual Removing the Mini-PCI Card Assembly, Replacing the Mini-PCI Card Assembly

Page 22

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Removing the Mini-PCI Card Assembly

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1Remove the memory module cover.

2To release the mini-PCI card assembly from its socket, spread apart the metal securing tabs until the assembly pops up slightly.

3Lift the mini-PCI card assembly out of its socket and disconnect any attached cables.

Replacing the Mini-PCI Card Assembly

NOTICE: The mini-PCI card must be inserted at a 45-degree angle to avoid damaging the connector.

NOTICE: The mini-PCI card is keyed, or designed to fit into its socket, in only one direction. Do not force the connection.

1Align the mini-PCI card with the socket at a 45-degree angle, and press the mini-PCI card firmly into the socket.

2Depending on the type of mini-PCI card you are installing, either connect the interface cables to the mini-PCI card, or connect the mini-coax antenna cable from the mini-PCI card to the internal antenna.

3Lower the mini-PCI card until it snaps into the metal securing tabs.

NOTE: If you are installing a wireless NIC, fold and tuck the unused interface cables into the slot so they do not interfere with the cover.

NOTE: A modem-only mini-PCI card has one connector; place the unused NIC connector under the mini-PCI card.

4Replace the memory module cover.

22

Removing and Replacing Parts

Image 22
Contents Dell Latitude C600/C500 Series Page Support.dell.com May 82EWX Rev. A01 Contents Replacing the 14.1-Inch Display Panel Index Contents Before You Begin Preparing to Work Inside Computer Recommended Tools S t e m O r i e n t a t i o nScrew Identification R e w I d e n t i f i c a t i o n R e w P l a c e m e n tDisplay Assembly Bezel Hinge Bracket to Display Assembly Latch Removing and Replacing Parts Components P l o d e d V i e wReplacing the Hard Drive Hard DriveRemoving the Hard Drive R d D r i v eRemoving the Memory Module Cover Memory ModuleM o r y M o d u l e C o v e r Removing the Memory Modules M o r y M o d u l e sMini-PCI Card Assembly Replacing the Memory ModulesModem connector Socket NIC connector Removing the Mini-PCI Card Assembly Replacing the Mini-PCI Card AssemblyRemoving the Keyboard Assembly Keyboard AssemblyRe m o v i n g t h e Ke y b o a r d S c r e w s Ke y b o a r d Replacing the Keyboard Assembly Ke y b o a r d C o n n e c t o rRemoving the Display Assembly S p l a y a s s e m b l y Removing and Replacing Parts N c h D i s p l a y a s s e m b l y B e z e l a n d Pa n e l Removing the 14.1-Inch Display Assembly Bezel Removing the 14.1-Inch Display PanelReplacing the 14.1-Inch Display Panel Removing the Display-Feed Flex Cable 14.1-Inch Display Panel S p l a y Fe e d F l ex C a b l eRubber screw covers M2.5 x 5-mm screws Removing the 12.1-Inch Display Assembly Bezel Removing the 12.1-Inch Display PanelReplacing the Display-Assembly Top Cover Replacing the 12.1-Inch Display PanelRemoving the Display-Feed Flex Cable 12.1-Inch Display Panel Display Assembly Latch Removing the Display Assembly LatchDisplay assembly latch Removing and Replacing Parts Removing the Hinge Covers Hinge CoversRe m o v i n g t h e H i n g e C o v e r s Replacing the Hinge Covers N g e C o v e r sPalmrest Assembly Removing the Palmrest AssemblyRemoving and Replacing Parts Pa l m r e s t a s s e m b l y Microprocessor Thermal Cooling Assembly Removing the Microprocessor Thermal Cooling AssemblyHybrid Cooling Fan B r i d C o o l i n g Fa nRemoving the Hybrid Cooling Fan Removing the Microprocessor Module Microprocessor ModuleC r o p r o c e s s o r M o d u l e s Replacing the Microprocessor Module Removing the Reserve Battery Reserve BatteryRe s e r v e B a t t e r y Replacing the Reserve Battery Speaker AssembliesRemoving the Speaker Assemblies Ro u t i n g t h e Le f t S p e a k e r C a b l eE a k e r a s s e m b l i e s System Board Assembly Replacing the Speaker AssemblyRemoving the System Board S t e m B o a r d a s s e m b l y Replacing the System Board S e m b l i e s Battery and Modular Bay Latch AssembliesRemoving the Battery and Modular Bay Latch Assemblies BumpRemoving and Replacing Parts D ex Index Page 82EWX Rev. A01 Support.dell.com