w w w . d e l l . c o m s u p p o r t . d e l l . c o m
26
NOTICE: Position the keyboard flex cable so it is not pinched when you replace the keyboard in the bottom case assembly.
4Check that the keyboard is correctly installed. The keys should be flush with the left and right surfaces of the palmrest.
5Reinstall the five M2.5 x
Removing the Display Assembly
NOTICE: You must remove the display assembly before you remove the palmrest assembly; the display assembly hinges pass through the back of the palmrest assembly.
NOTE: Always remove and replace the display panel as a complete assembly.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
Removing and Replacing Parts