![](/images/new-backgrounds/1121155/12115525x1.webp)
Back to Contents Page
Computer Cover
Dell™ Vostro™ 420/220/220s Service Manual
Removing the Computer Cover
Replacing the Computer Cover
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
CAUTION: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets,
NOTICE: Ensure that sufficient space exists to support the system with the cover
NOTICE: The procedure for removing and replacing the computer cover is identical for the Vostro 420, Vostro 220, and Vostro 220s computers; the illustration provided is for example only and may not represent your particular computer precisely.
Removing the Computer Cover
1.Follow the procedures in Before Working on Your Computer.
2.Lay the computer on its side, with the cover facing up.
3.Remove the two thumbscrews securing the cover.
1 handle | 2 computer cover |
3front of computer, bezel
4.Release the computer cover by grasping the handle while sliding the cover away from the front of the computer and lifting it up.
Replacing the Computer Cover
1.Ensure that all cables are connected and folded out of the way.
2.Ensure that no tools or extra parts are left inside the computer.
3.Ensure that the bezel is attached to the front of the computer (see Replacing the Bezel).
NOTE: The bezel must be installed before the cover is installed.
4. Holding the cover at a slight angle, slide it toward the front of the computer until the metal clips inside the cover grip and attach securely to the chassis